Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Berkeley, CA

Efflorescence Removal for Pavers in Berkeley, CA

Pressure wash with a surface cleaner for pavers. Removing white, chalky salt deposits from brick, pavers, concrete and stone. Typical cost $200-$600.

Looking for efflorescence removal for pavers in Berkeley, CA? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. On pavers, the method we use is pressure wash with a surface cleaner.

Method and pressure

Pressure wash with a surface cleanerCleaning method
Usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possiblePressure

Cleaning solution: A paver cleaner or pre-treatment; efflorescence needs a dedicated cleaner.

Caring for pavers

Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them. Re-sanding the joints, often with polymeric sand, and sealing afterward keeps weeds and ants out and holds the pavers in place.

Avoid: A narrow tip aimed into the joints, which blows out sand and can loosen pavers.

How often: Clean every 1-2 years; reseal every 2-4 years.

When to book efflorescence removal for pavers

  • White powder or crust on brick, block or pavers
  • Haze that comes back after rain
  • White lines along mortar joints

Where the grime comes from

  • Water moving through masonry and carrying salts to the surface
  • New pavers and concrete still curing
  • Downspouts and sprinklers soaking the masonry

Safe steps for homeowners

  • Brush dry efflorescence off with a stiff brush before wetting it
  • Fix water sources such as gutters and sprinklers
  • Wait out new installations: efflorescence on new pavers often fades on its own

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Washing with plain water, which can dissolve salts and redeposit them
  • Strong acids that burn masonry
  • Sealing over efflorescence, which traps it

How we handle efflorescence removal for pavers

  1. Find the moisture source
  2. Dry-brush loose salts
  3. Apply an efflorescence cleaner
  4. Rinse and neutralize
  5. Seal only once the surface is clean and dry

Efflorescence Removal for Pavers cost in Berkeley, CA

$200-$600Typical range for a typical wall, patio or walkway
1-3 hoursTypical time on site
As needed; it can return until the moisture source is fixedRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for pavers

Serving Berkeley, CA and nearby towns

Hard-water spots from sprinklers, rust from irrigation, and oil on driveways are the most common stains in California.

Much of California has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.

We provide efflorescence removal for pavers across Berkeley (ZIP codes 94701, 94702, 94703, 94704, 94705 and more) and nearby towns including Albany (1.7 mi), Kensington (2.7 mi), Emeryville (2.9 mi) and El Cerrito (3.7 mi). Call (555) 010-0000 for a free quote in Berkeley.

Efflorescence Removal for Pavers: frequently asked questions

How much does efflorescence removal for pavers cost in Berkeley, CA?

Efflorescence Removal for Pavers typically costs $200-$600 for a typical wall, patio or walkway, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for efflorescence removal for pavers?

For pavers: usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possible. What we avoid: a narrow tip aimed into the joints, which blows out sand and can loosen pavers. We keep the pressure even and controlled, with the right tools for the surface.

Is efflorescence removal for pavers safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule efflorescence removal for pavers?

Clean every 1-2 years; reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Berkeley, CA

Patio Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$400

Soft Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$800

Fleet Washing

On-site washing for company trucks, vans, trailers and equipment, scheduled at your yard.

Typical $150-$800

Roof Cleaning for Metal Roofs

Soft wash. Painted metal roofs collect dirt, mildew and oxidation chalk.

Typical $400-$1,000

Driveway Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$400

Commercial Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$2,000

House Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $300-$700

Rust Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$500

Gum Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$1,000

Pre-Paint Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $250-$600

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Garage Floor Cleaning

Garage floor degreasing and pressure washing to lift oil, tire marks and road salt residue.

Typical $100-$300

Ready for a cleaner home or business?

Get a free pressure washing quote in Berkeley, CA. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote